NPF915
prodtransdistferroindus

NPF915

Feeder protection

Designed to protect and monitor three-phase electrical networks against all types of short-circuits, between phases and between phase and earth. Optional cards (I/O, communication…) are available for more comprehensive monitoring and control applications.

The NPF915 communicates using various protocols, including the IEC 61850 substation communication standard.

, ,
Double busbar control
Directional and voltage protection
Cable end differential protection
Low-impedance REF protection
Harmonics protection and control
5-shot scheme controlled autorecloser
Energy and Power measurement accuracy better than Class 0.5 S
Communication interfaces
Communication protocols
Mesures and operations
Power supply
Type of option cards
Current inputs
  • 3
Sensitive current inputs
  • 2
Voltage outputs
  • 3
Disturbance records
  • 100
Event logs
  • 10000
Digital inputs
  • 3
Digital outputs
  • 5
Watchdog output
  • 1
Indication LEDs
  • 20
Number of optional modules
  • 3
  • 21FL — Underimpedance fault locator
  • 25 — Synchro-check
  • 27 — Undervoltage
  • 32 — Directional power
  • 32R — Reverse active power
  • 37 — Undercurrent
  • 46 — Reversal, loss of phase or unbalance phase
  • 46L — Maximum ratio of negative and phase current
  • 47 — Negative sequence overvoltage
  • 49F — Cable thermal overload
  • 50 — Instantaneous overcurrent
  • 50BF — Breaker failure
  • 50H — Instantaneous harmonic overcurrent
  • 50N — Instantaneous residual overcurrent
  • 51 — Time overcurrent
  • 51H — Time harmonic overcurrent
  • 51N — Time residual overcurrent
  • 51V — Voltage-restrained time overcurrent
  • 52 — Breaker failure position
  • 59 — Overvoltage
  • 59N — Zero sequence overvoltage
  • 60 — Voltage balance
  • 67 — Phase directional overcurrent
  • 67N — Earth directional overcurrent
  • 67NI — Intermittent earth directional overcurrent
  • 68 — Cold-load pick-up block
  • 68H — Inrush Harmonic Blocking
  • 74TC — Trip circuit supervision
  • 78 — Loss of synchronism – Vector jump
  • 79 — Autorecloser
  • 79N — Automatic Reclosing / Synchronism Check – Neutral
  • 81O — Overfrequency
  • 81R — Rate of change of frequency – ROCOF
  • 81U — Underfrequency
  • 86 — Locking-out function
  • 87C — Cable-end differential protection
  • 99 — Programmable functions and logical editor

Need any advices ?

For over 75 years, we have been supporting the energy transition by designing protection and control solutions for electrical networks.

Contact us